uct materials and production process , so the products produced appear performance defects and practical function is reduced . Some customer are holding ready-made products for Soft-hardness comparison directly and then choose one of them . In nowadays the custom silicone bracelets is one of them. So how to choose the hardness for custom silicone bracelets . The choice of softness and hardness of silica gel will have different effects on the properties of different products . At present, the hardness of commonly used silica gel hand rings is between 40 degrees and 60 degrees and material with different hardness has certain difference . For example , the tensile rate of 40 degree materials will reach about 150% , and the tensile rate 60 degree materials can only reach about 80% . So in order to confirm the functionality of products , we have to test them . It is more difficult to produce high hardness silica gel hand rings . For the manufacturers of silica gel hand rings , the higher the hardness , the higher the defective rate of the products and the pulling force of the products will also be affected and will cause fracture phenomenon at any time . Therefore , we suggest that the hardness of the silica gel hand rings should not be too high . price and durable and comfortable to wear. And also most importantly, it is easy way to meet the request. It shows up a slogan and logo. We can match all the pantone colors, for the band color and logo color. The band can be solid, segment, swirl, glowing and UV transfer. Glowing wristband can glow several colors, it is the best for night event like bar party, concert or night walk. We can make it party city theme. A glow in dark siliconevent bracelets wristbands/www.silicone-wristbands.co.uk/event-bracelets-wristbands">event bracelets wristbandse wristband can glow green or blue after absorbing strong light energy under the effect of phosphor which is very small amount added and green to human. The glow will fade gradually in about 3h depending on how much light it absorbs. The logo can be same as regular debossed, embossed or printed on the glowing wristbands. After exposure to natural light, fluorescent light, and ultraviolet light, the phosphor can store the light energy, stop the light and release it slowly in the way of fluorescence, so the light can still be seen at night or in the dark, lasting for hours to more than ten hours.